MDP Geoffrey Skull & Swords Heat transfer

mdpgeo9 (Large).png
mdpgeo9 (Large).png

MDP Geoffrey Skull & Swords Heat transfer

3.50 5.00

Now you can brand just about any soft good you own with this high quality heat transfer. measuring roughly 4”x3” . We suggest you take your transfer to a local tee shirt shop and have them use their heat press. these do require specific setting for proper application.

Manufacturer instructions:


Temperature: 325 Degrees Fahrenheit  
Time:   7 Seconds  
Pressure: High Pressure (8-9 Manual, 60PSI Automatic)  
Peel: Hot Peel

Add To Cart

Duratrans  Transfer instructions:

Note: when using a manual press heat transfer machine, increase pressure until resistance is felt when closing the machine.

1) Pre-press garment for 5 seconds

2) set heat transfer machine to 375-385degrees at 45-50psi

3) place heat transfer in position printed side down

4) lock heating head in position for for 4-5 seconds

5) release heating head and peel transfer away immediately while garment is still on the heat transfer machine

wash with warm water,turn garment inside out. use non-chlorine bleach,dry on warm setting with garment inside out. do not use hot water over image. application may very with type of transfer, the condition and type of application machine, source of air pressure, and atmospheric plant conditions, test the fabric for suitability to the printing and the printing process. launder the fabric PRIOR to processing.